FRS imported line pressure regulator for the United States' Protection Controls

The DUNGS FRS 7./6 line pressure regulator is a balanced spring loaded regulator with adjustable set points.

They have an internal sensor for adjusting the output pressure- Input pressure up to 10 PSI (CSA to 5 PSI)

-High flow rate

-The output pressure of the regulator is adjusted firmly, accurately, and sensitively

-Locking regulator

-Exhaust limiter; Approved by some competent authorities as a non exhaust regulatory agency. (Review applicable specifications for ventilation pipeline requirements)

The FRS series pipeline pressure regulator is recommended for any application that requires a pipeline regulator to reduce the inlet pressure to a lower pressure suitable for appliances or equipment. Suitable for inert gases such as natural gas, propane, butane, air, etc.

Factory certified for maximum working pressure, up to 10 PSI (700 mbar) ANSI Z21.80 CSA certified, up to 5 PSI (350 mbar)

Input pressure range 2 to 200 in.W.C. (5 mbar to 500 mbar)

Output pressure range I level 4-10 W.C. includes 10 to 22 "W.C.OPD (overvoltage protection device) II level 28-40 ambient temperature rating -+5 F to+150 F, with a maximum adjustable range of 7 PSI (+/-10% of set value) -40 F to+15 F: The diaphragm is suitable for low temperatures, but there may be adjustment behavior beyond the range. Aluminum body; two upstream and downstream faucets; one tap at the top; for technical details, flow rate, and pressure drop, please refer to the selection guide.