AXIAL EXTENSOMETERS

6 models in this group cover tension, compression and cyclic testing

Huge variety of gauge lengths and measuring ranges

Cover temperatures from -265 to +200 °C (-450 to +400 °F)

3442 extensometer3542 extensometer3542L extensometer3543 extensometer3560 extensometer3800 extensometerlaser extensometer> GO TO AXIAL OVERVIEW

HIGH TEMPERATURE AXIAL EXTENSOMETERS

4 models cover a variety of applications for high temperature testing

1 un-cooled model for use inside chambers up to 600 °C (1000 °F)

Other models for use with split furnaces and induction heating, up to 1600 °C (2900 °F)

3448 extensometer3549 extensometer3648 extensometer7642 extensometer> GO TO HIGH TEMPERATURE AXIAL OVERVIEW

TRANSVERSE AND DIAMETRAL EXTENSOMETERS

3 models cover most any test requirement and can be used with axial extensometers at the same time

Miniature and standard units, also r-value units

Available options cover temperatures from -265 to +200 °C

(-450 to +400 °F)

3475 extensometer3560 extensometer3575 extensometer3575 extensometer> GO TO TRANSVERSE AND DIAMETRAL OVERVIEW> BACK TO TOP OF PAGE

HIGH TEMPERATURE TRANSVERSE AND DIAMETRAL EXTENSOMETERS

1 un-cooled unit for use inside chambers to 600 °C (1000 °F)

1 model for use with split furnaces and induction heating, to 1000 °C (1830 °F)

3580 extensometer7675 extensometer> GO TO HIGH TEMPERATURE TRANSVERSE AND DIAMETRAL OVERVIEW> BACK TO TOP OF PAGE

FRACTURE MECHANICS CLIP-ON GAGES

3 models cover a broad range of gauge length, measuring ranges and temperatures, for fracture tests in compliance with various standards

3541 extensometer3548COD extensometer7641 extensometer> GO TO FRACTURE MECHANICS CLIP-ON OVERVIEW> BACK TO TOP OF PAGE

ROCK, CONCRETE AND ASPHALT EXTENSOMETERS

7 models cover axial, circumferential and diametral testing on aggregate material

3442RA extensometer3542RA extensometer3544 extensometer3909 extensometer3910 extensometer3911 extensometer3975 extensometer> GO TO ROCK, CONCRETE AND ASPHALT OVERVIEW> BACK TO TOP OF PAGE

DEFLECTION GAGES (DEFLECTOMETERS)

Widely used for 3 and 4 point bending tests, compression tests and general deflection measurement

3540 extensometer> GO TO DEFLECTION GAGES PRODUCT PAGE> BACK TO TOP OF PAGE

SPECIALTY EXTENSOMETERS

6 models to cover more specialized testing: axial/torsional, biaxial and axial averaging, bolt proof testing, ASTM D5656 shear testing, and submersible extensometers

3550 extensometer3550HT extensometer3560 extensometer3565 extensometer4013 extensometer4030 extensometer> GO TO ROCK, CONCRETE AND ASPHALT OVERVIEW> BACK TO TOP OF PAGE

ELECTRONICS