|
INTRODUCTION
The Hoistman’s Touch Screen Panel from BenchMark Wireline is a panel that is used to acquire and display depth and tension data from a wireline logging winch unit. The panel provides the operator a means to set and make adjustments to the data as necessary. Depth is displayed from data provided from an encoder mounted on a measuring device. The tension data is provided by a load pin mounted on a measuring device and is also passed through to the acquisition system. The panel will operate with the AM5K Dual Wheel Measuring Device for both open hole and cased hole services. The system consists of two main components, the real time acquisition board and the PC. The acquisition board provides power to and processes the signals from the encoders, load pin, and magnetic mark detector. This board operates independent from the PC and is instantly on when power is applied. It also is connected to LED displays for depth and tension. This allows depth and tension to be displayed immediately on power up and always be displayed regardless of the PC status. The PC uses an Intel based high speed processor running MS Windows XP embedded. The PC includes a color touch screen for operator input and command entry. The PC is Ethernet ready for connection to the internet for remote display and control. GENERAL SPECIFICATIONSHeight: 8.72 inches .221 meters Width: 17.00 inches .431 meters Depth: 5.50 inches .139 meters Weight: 7.5 lbs 3.40 kg Tension Transducers: Passive low voltage, Differential voltage, 4-20ma current loop |
|